The Hyundai Genesis Wing Emblem Kit! This is the KDM kit that makes your Genesis Sedan turn heads! Check out our pics! We have every KDM wheel caps available for every trim level. Fits the 2009-2014 model years.
Hyundai Genesis Wing Emblem Kit
- Both the Hood and Trunk Emblems
- The Steering Wheel Emblem
- 4 Wheel Cap Replacements for all model Genesis
The Hyundai Genesis Wing Emblem Kit is a rebadging kit and are KDM accessories that make your luxury vehicle indistinguishable from the rest. It isn't very often when you'll see another car with the Hyundai Genesis Wing Emblem Kit equipped.
Hyundai Genesis Wing Emblem Kit installation instructions:
- Hood and Trunk Emblems: You must grind down the back prongs on both these emblems to equip them. This is because the Korean domestic market's have factory holes for these fittings. However, any non-Korean models can equip them just by sawing/grinding down the back prongs off. Also, these require your car to be cleaned spotless! So after removing the "H" logo emblem and cleaning your car, feel free to equip to your vehicle!
- Steering Wheel Emblems: You do not need to remove the "H" logo emblem. This can be applied over the emblem. Heat the new emblem a bit with a hair dryer for a minute or two for the tape to have its best adhesive capabilities. After applying over the current "H" logo emblem, heat it again for another minute or two.
- 4 Wheel Cap Emblems: These are simple to equip! All it takes is for you to take off the old emblems and popping these in as a replacement! The Genesis comes factory equipped with one of four different factory wheels. We have provided pictures to let you know which type of center wheel replacements you will need to order.
- All 17" wheels need the manufacturer's part #: 52960-3M000
- Rounded 18" Alloy Wheels (see pictures if unsure) need the manufacturer's part #: 52960-3M100
- Waved 18" Hyper Alloy Wheels (see pictures if unsure) need the manufacturer's part #: 52960-3M200
- All R-Spec models will need the manufacturer's part #: 52960-3M000 (these caps fit the R-Spec and 17" wheel caps)